Fritschi Freeride Pro 100 mm XL 13/14 Ski Touring Bindings

Safety and customer value have always been a top priority for Fritschi. Consequently, achieving an optimal balance between safety, performance and weight is the primary concern.


Safety:
- Rotating toe piece:
Exactly as with alpine bindings, the rotating toe piece provides a lateral release. The special, extraordinarily long dynamic range on both sides only releases ski boots after 20 millimeters. This reduces the number of unintentional releases to a minimum and triggers the release when there is continual lateral force. This mechanism is supported by a high restoring force. This feature is extremely important for safety, especially in uneven terrain. .

Modern swivel antifriction plate:
- Safety above all: The swivel plate with smooth surface enables consistent and friction-free sliding of the boot. This is particularly important for touring and freeride boots with rubber soles.

Automatic heel release:
- The binding only releases after a long dynamic travel of 13 mm and consequently only reacts in an emergency. The perfect fit of the automatic heel releases ensures optimum foothold for all touring and alpine ski boots normed according to DIN ISO.

Operating Instructions:
- Operating Instructions

Comfort:

Comfort Lock:
- Switching between uphill and downhill mode using a ski pole is just as easy and quick as changing the walk mode levels.
- Similar to the jaw systems of modern safety bindings, the tip of the boot is secured by contact pressure in the toe piece and laterally stabilized, irrespective of the mode. Therefore, the system is sure to release even in uphill mode.

Comfort Lever for four walk mode levels 0°/3°/9°/13°:
- Change between four optimally synchronized walk mode levels with maximum ease. You can change the walk mode level very simply using your ski pole. Diamir bindings provide optimum lateral stability for secure footing in every walk mode level.

- Power Transmission:

Sliding binding bar:
- In the SAFETY ALUBAR SYSTEM of the Diamir bindings the boot is securely fixed onto the stable linkage of the binding bar between the toe piece and heel mechanism. The bar slides back and forth in a guide as the ski bends. This active compensation to the front and back allows the best natural flex and thus always ensures full edge grip along the entire ski.

- Broad support:
The broad support of the binding via the hinge support in the toe part and the heel support in the back causes a direct transmission of power.

Operating Instructions:
- Operating Instructions

Traction:

Axion Tech – easy-activation crampons:
- Diamir Axion crampons are mounted to the bottom of the binding with just a few easy steps. Flip it up to climb without engagement as if no crampons were attached. Simply flip the blade down with a ski pole, as needed, to engage the crampons without stepping out of the binding. Similarly, flip the blade back up to disengage. No other crampon is easier to use than the Axion and this is precisely the reason why it contributes substantially to safety.


Specifications:

DIN: 4 – 12
Ski width: > 80 mm
Weight: 1000 g/unit without brake
Position height: 39 mm from the top edge of the ski
Ski brake, standard equipment: 100mm

Sizes:
SM: Boot sole length 260–315 mm
ML: Boot sole length 285–340 mm
XL: Boot sole length 330–365 mm

At the ski store, snowinn, you can find different sizes of Fritschi Freeride Pro 100 mm XL 13/14 Ski Touring Bindings and in the different colors . In addition, you can also complete your order with products related with Fritschi Freeride Pro 100 mm XL 13/14 Ski Touring Bindings or the category Ski bindings from our online ski store. Read our expert advice guides about ski equipment and also the Fritschi Freeride Pro 100 mm XL 13/14 Ski Touring Bindings reviews.